What is Gunia In Construction – How to Measure Gunia – Best Method to check Gunia

What is Gunia In Construction // How to Measure Gunia – गुनिया कैसे निकाले ?

 

Hello friends,

 

Today I am going to discuss a very important article that,

 

What is Gunia In Construction // How to Measure Gunia – गुनिया कैसे निकाले ?

 

Means if our constructed walls going to be bend than how to correct it or how it can be Correct on 90 degree angle?

 

Most of the times it is asked in the  interview by interviewer that if you are doing a construction and the wall is going to be bend  means not on 90 degree angle or your walls has a “Gunia Problem” than how can you correct this or make the 90 degree angle of your wall corner without any instrument without any tools by only with Measurements tape.

 

 What is Gunia In Construction
What is Gunia In Construction

Ok friends So, Basically today I am going to tell you ,

 

What is Gunia In Construction // How to Measure Gunia for walls गुनिया कैसे निकाले ?

 

 What is Gunia In Construction
What is Gunia In Construction

 

ok let’s started

 

Basically for  “Check Gunia” we will use a method

 

3:4:5 methods,

 

Now what is the 3:4:5 methods,

 

So don’t worry I will clear all the things that what is 3,4,5 methods and how to calculate “Gunia” by this method

 

So, first of all you must be a measurement tape.

 

 What is Gunia In Construction
What is Gunia In Construction

 

With the help of measurements tape we will check “Gunia” of a wall.

 

Lets take an example,

 

Suppose you have a wall A to B

 

What is Gunia In Construction
What is Gunia In Construction

And 2nd wall is A to C                                           

 

 Which is shown in above fig…….

 

For More Details

 

What is 3 :4 :5 triangal method?

 

If we seen these walls with naked eye they  have appear a good corner  or straight in position.

 

What is Gunia In Construction
What is Gunia In Construction

But , How Can we sure and say that they are correct…….

 

So,this is only Possible by “Gunia Measurements”.

 

So,

 

First of all measure a 3 feet length on the  wall A to B with the help of measurement tape.

 

What is Gunia In Construction
What is Gunia In Construction

 

And mark at 3 feet new point and give name of new point suppose that D.

 

Now  measure a 4 feet length on the wall A to C with the help of measurement tape,

 

And mark at 4 feet and give name of new point suppose that E.

 

What is Gunia In Construction
What is Gunia In Construction

 

Now your AD = 3 feet and,

 

A E = 4 feet

 

ok friends,

 

Now If you measure the length of  D to E ,

 

What is Gunia In Construction
What is Gunia In Construction

 

 

the length must be 5 feet

 

So, If your Length D to E will be 5 feet that means your walls has no Gunia Problem and they are making a 90 degree angle,

 

But If your length D to E is not 5 feet than your wall corner angle is not a 90 degree angle and your walls has Gunia problem.

 

Than How to Correct this ?

 

Suppose As shown in fig 

 

What is Gunia In Construction
What is Gunia In Construction

Your length of D to E comes 5’ 4’’

 

It means your one wall is out 4 inch either wall A to D otherwise A to E.

 

So, how can you Correct this ,that your walls made a 90 degree angle?

 

So  You will have to adjust one walls Either A to C otherwise A to B.

 

So,suppose we adjust the wall A to C

 

And take it inside 4 inch

 

What is Gunia In Construction
What is Gunia In Construction

And check again, Now your walls Must be A to D 3 feet,A to E 4 feet or D to E 5 feet.

 

If All these dimensions are find ok than your walls is ok.

 

Ok friends,

 

this is the methods to minimize or correct the walls with Gunia.

 

So,Its my Suggestion for better learning you should try practically at site.

 

So, I hope now you understand that What is Gunia In Construction and How to Measure Gunia and this article will be very useful for all of you………

 

Thanks & Good Bye,

 

Happy Learning  😆 

 

 

Also Read …….

 

Important Civil Engineering Interview Questions & Answers

Important Technical Terms Of Reinforcement

STRUCTURAL SYSTEM OF BUILDING/LOAD BEARING STRUCTURE, FRAMED STRUCTURE AND COMPOSITE STRUCTURES

 

Share Post with freinds

Leave a comment