2 Easy Methods of Dampness Treatment By Dr. Fixit Super Latex

Dampness Treatment Methods

 

 Dampness Treatment
Dampness Treatment

 

 

 

 

 

 

 

 

 

Dr. Fixit Super Latex Methods  for Dampness Treatment

 

My Engineering Support
Dampness Treatment

Dr. Fixit the water proof expert is offers full proof solution of this dampness treatment. Dr. Fixit Super latex is an Economical and effective solution for dampness treatment and repairs.

Dr. Fixit Super Latex is an S B R based polymer which makes a flexible coating on the surface and does not allow any seepage to pass through it to create dampness on the wall.

Super Latex two coats of water proofing on wall has faster drying time and help in faster completion of the work.

 

2). Application Procedure for Mild dampness treatment :-

 

Dampness Treatment
Dampness Treatment

 

 

 

 

 

 

 

 

 

Step-1

Clean the Damp area Surface using wire brush. Remove all existing paint and wall putty and go up to Surface plaster is visible. Wide 2 feet more from dampness areas.

 

Dampness Treatment
Dampness Treatment

 

 

 

 

 

 

 

 

 

Step – 2

Remove all dust Particles.

 

Dampness Treatment
Dampness Treatment

 

Step-3

 

Take Super latex polymer in a bucket mixed with cement. Mixing ratio 1 kg Super latex and 1.5 kg Cement mixing properly.

 

Dampness Treatment
Dampness Treatment

 

Step-4

 

Apply first coat of super latex proofing on plaster surface and let it dry for 4 to 6 hours.

 

Step-5

 

Apply second coat of Super latex and let the second coat dry 4 to 6 hours and sprinkling sand when the coat is stacking. Ensure it is applied 90 degree to the first coat.

 

Step-6

 

Apply Plaster on two coats of super latex mixed Dr. Fixit LWT in plaster in dosage of 200 ml. per 50 kg bag of cement for better results.

 

Step-7

 

Ensure Plaster is cured Accurately and then apply wall putty mixed with Dr. fixit Super Latex.

 

Application Procedure in case of severe dampness :-

 

Step-1

 

Clean the Damp area using wire brush. Remove all existing paint and wall putty and Surface plaster to go up to brick level is visible.  

 

Dampness Treatment
Dampness Treatment

 

Step – 2

 

Clean the brick surface with wire brush and clean the entire loose particles from the surface Ensure the surface is clean and free from oil, loose materials and salt deposition.

 

Dampness Treatment
Dampness Treatment

 

Fill Brick gaps with polymer modified mortar mix with Dr. fixit Super latex.

 

Step-3

 

Clean the surface with water and bring it in S S D Condition

 

Step-4

 

Take Super Latex Polymer in a bucket and mixed cement with the polymer. Mixing Ratio 1 kg Super latex and 1.5 kg cement ,make sure the cement is mixed accurately.

 

Step-5

 

Apply first coat of super latex proofing on Brick surface and let it dry for 4 to 6 hours.

 

Step-6

 

Apply second coat of Super latex and let the second coat dry 4 to 6 hours and sprinkling sand when the coat is stacking. Ensure it is applied 90 degree to the first coat.

 

Step-7

 

Apply Plaster on two coats of super latex mixed Dr. Fixit L W T in plaster in dosage of 200 ml. per 50 kg bag of cement for better results.

 

Step-8

 

Ensure Plaster is cured Accurately and then apply wall putty mixed with Dr. fixit Super Latex.

 

Mix 10% super latex to the weight of wall putty. If you take 50 kg wall putty than mix 5 kg super latex.

 

Before paint we recommended to apply single coat of Dr. fixit Super latex seal a coat on wall Putty in mixing ration 1 part super latex 2 part of water.This will give Traditional water proof wall putty.After seal a coat apply paint as per standard procedure.

 

To stop issue of internal wall dampness use Dr. Fixit Super Latex.An economical and effective dampness treatment solution for home dampness.

 

Water Proofing for Bathrooms, Kitchen, Sink, Balconies :-

 

Methods of application Dr. Fixit Pidiline 2 k – 112

 

i). Surface Preparation

 

a). Remove all loose particles, existing paint and wall with wire brush.

 

b). Wash with water Sprinkling.

 

ii). Mixing

 

a). Mixing ratio 1:2 ( liquid : Powder ) Properly shake.

 

b). Use Slow Speed Mixer.

 

Applications :-

 

a). Sanitary Pipe Grouted :-  Dr. fixit Pidilite 5m

 

b). Filled Mortar :- Dr. fixit Lwt – 101 , Dr. Fixit Pidierate URP – 301

 

c). Apply first coat vertically,2nd coat horizontally ( After first coat dried ).

 

d). Protect from Sunlight.

 

Precautions:-

 

Complete cured for 7 days.

 

Coverage Area :-

 

Approximately – 0.6 to 0.75 m 2 / kg or 6 to 8 sq ft.

 

Packing & price :-

 

a). 3 kg

 

b). 15 kg

 

Health and safety Precautions:-

 

a). Googles and dust mask.

 

b). Any contact to eyes wash immediately to clean water medical advise.

 

Note:-

 

i). Always use water proof Paint.

 

ii). When you do wall Putty , Let it proper Dry.

 

iii). One important things always remember, Mostly when our walls plaster is drop down than we will apply wall putty but it is not a better solution .You should always apply Cement Plaster.

 

iv). Another myth is that, We always think that if the dampness areas covered by tiles the dampness is finished ,But it is not the truth,it you covered the dapm area by tiles the dampness not showing on that portion but it will increase upward direction.

 

I recommended that , In market there are many products available of Dr. fixit for water proofing, use them.

 

If you identified the leakage or seepage ,you can use grouting at there.

 

Dr. Fixit method is the cheap and best method to prevent dampness by using Super latex or pidifin super grout .

 

Other Important Tips for Prevent Dampness

 

1). During the construction of house or building you should check or test ground soil moisture.and if required take proper precautions before construction .

 

2). There should not be any source of water near house construction.

 

3). When you purchase or construct a house , you should always remember that there should not be any nala or river near by the house because due to it the dampness can easily enter into the house.

 

4). When you constructed a house . Always use good construction materials and foundation must be carefully constructed.

 

5). Generally R C C is itself a damp proof compound . At the time of house construction Always use proper grade of concrete for different members of structures.

 

6). Never use cheap and local brands paints for your interior or exterior walls .Always use a Branded water proof paints for your walls to prevent dampness.

 

So, Friends These are the 3 best methods for dampness treatment ,very economical and effective solutions 

 

I hope this article will be useful or informative for you all

 

Thanks & Good Bye,

 

Happy learning 😆 

 

Also Read :- 

 

DAMPNESS IN BUILDING,REASONS/CAUSES AND PREVENTION METHODS OF DAMPNESS

BAR BENDING SCHEDULE OF COLUMN BBS

 

Share Post with freinds

1 thought on “2 Easy Methods of Dampness Treatment By Dr. Fixit Super Latex”

  1. Dr. Fixit we supply Waterproofing Chemicals in BD market.
    We have strong Technical and distributor agreement with a world-class producer all over the world. Our Supply ability and Network make our top position in the Bangladesh market. So, we are the best Dr. Fixit waterproofing chemicals supplier in Bangladesh for your constriction.

    Reply

Leave a comment